How do I test my smoke and carbon monoxide alarms?
Press and hold the test button on each alarm until it gives a loud, full sound. Then stand in a bedroom with the door closed and make sure you can hear it from there. Smoke alarms wear out at 10 years old, and carbon monoxide alarms follow the date and label on the alarm itself. I'll remind you when it's time.
Quick steps
- Count your alarms. You want one in every bedroom, one outside each sleeping area, and one on every level.
- Press and hold the test button on each alarm until it sounds.
- Have someone press the button while you listen from a bedroom with the door closed.
- Vacuum the alarm vents gently with a soft brush.
- Take each smoke alarm down and read the date printed on the back.
- Read the label on each carbon monoxide alarm for its own replacement date.
- Learn what a chirp means so you know when an alarm is asking for help.
The longer version
Most alarms sit on the ceiling for years and never make a sound. That's good news until the night you need one. A few minutes with each alarm tells you whether it's ready.
Dana in Frisco woke up to a chirp in the middle of the night. She pulled the battery out to get some quiet and meant to put a fresh one in the next day. The alarm stayed empty. A smoke alarm with a dead or missing battery gives no more protection than having no alarm at all. A chirp means the battery is running low, according to the CPSC, so the fix is a fresh battery the same day, then a test.
Why it matters here
The National Fire Protection Association reported in February 2019 that almost three out of five home fire deaths happened in homes with no smoke alarms or none that worked. The same report found the risk of dying in a reported home fire was 54 percent lower in homes with working alarms.
Carbon monoxide is the other half. You can't see it or smell it. The CPSC says it kills more than 400 people in the U.S. in a typical year, citing the Centers for Disease Control and Prevention. That's why the alarm belongs near the bedrooms.
If you need alarms, check with your city. The Texas State Fire Marshal's office lists free alarm programs in Dallas for owner-occupied single-family homes and duplexes, and in Fort Worth, which offers free detectors and battery replacement. Plano helps older and disabled residents who can't afford alarms. Programs change, so call your fire department first.
Each step, explained
Count your alarms
Walk the house and look up. The U.S. Fire Administration says to put alarms inside and outside each bedroom or sleeping area, and on every level, including the basement. A closed door can slow the spread of smoke and heat, which is why the one in the hall isn't enough on its own. Alarms go on the ceiling or high on a wall, following the maker's directions.
Carbon monoxide alarms follow a similar plan. The CPSC says to have one on each level and one in the hallway near each separate sleeping area.
Press the test button
The test button is on the face of the alarm. Press it and hold it for a few seconds. A loud, full alarm pattern means it passed. A weak sound or silence means it needs attention, according to Kidde.
These alarms are loud on purpose. Stand a few feet back, and cover your ears if you're sensitive. Use the button and never a match or a candle, because Kidde says that's not a safe way to test. If an alarm fails, put in a fresh battery and clean it, then test again. If it still fails, replace the whole alarm.
Listen from a bedroom with the door closed
This is the step most people skip, and it's the one I like best. Ask a family member to press the button on the hallway alarm while you lie on the bed with the door shut. If you can only barely hear it, that matters.
The CPSC tested this in three homes in a 2005 study, revised in 2007. Closing a lightweight door cut the sound by roughly 10 to 20 decibels. In one home, the hallway alarm was too quiet in the closed bedrooms to wake an adult. The fix is an alarm inside the bedroom. If that alarm would be hardwired, an electrician does the install.
Vacuum the vents
A clean alarm behaves better. Kidde says to vacuum the vents gently with a soft brush attachment, or use short bursts of compressed air. Wipe the cover with a dry cloth. Skip water, sprays and household cleaners. Then press the test button again.
Cleaning to the maker's directions also cuts down on nuisance alarms, according to the CPSC.
Find the date on the back
Take the smoke alarm down and look at the back. You'll see a manufacture date. The U.S. Fire Administration says to replace the whole alarm 10 years after its manufacture date, and the NFPA agrees that all smoke alarms should go when they are 10 years old.
If you can't find a date, Kidde says to treat the alarm as due for replacement. Take a photo of the date with your phone before you put it back. Then you won't need the ladder again just to read it.
Carbon monoxide alarms follow their own label
A carbon monoxide alarm wears out on its own timeline. Kidde says its non-digital alarms last 7 or 10 years, depending on the model. Read the label and the date on yours, and go by that. Combination smoke and carbon monoxide alarms can have an earlier replacement date than a smoke-only alarm, so check the user guide for your model.
What a chirp means
One short chirp now and then on a smoke alarm with a replaceable battery means the battery is low. Kidde describes it as a single chirp about every 30 to 40 seconds. Replace the battery, then test the alarm.
A sealed 10-year alarm that chirps is telling you something different. Kidde says chirping about every 30 seconds on a sealed alarm means the whole unit should be replaced, and you shouldn't try to silence it. A carbon monoxide alarm at the end of its life makes a brief tone about every 30 seconds and flashes a red light, and new batteries won't stop it. Replace the alarm.
What people get wrong
Taking the battery out to stop a nuisance alarm is the big one. The U.S. Fire Administration says never remove the battery. Open a window, wave a towel near the alarm, or press the hush button. If the alarm sits near the kitchen or bathroom, moving it several feet away can fix it for good.
Testing one alarm and calling it done is another. Test every one, because each alarm is a separate device with its own battery and its own date.
People also trust an old alarm because it still sounds when they press the button. Check the date on the back anyway, because the 10-year age applies to the whole alarm.
When to call a pro
Hardwired alarms are wired into your house power, and the U.S. Fire Administration says only qualified electricians should install them. If a hardwired alarm needs replacing, call a licensed electrician. If you suspect a problem with a gas furnace, water heater or other gas appliance, call a licensed pro for that too. Gas work is never a do-it-yourself job.
If you don't have alarms, ask your city's fire department about its free alarm program. The list at the bottom of this page links the state directory.
Sources
- U.S. Fire Administration, Smoke Alarms. Checked Nov 20, 2026.
- U.S. Consumer Product Safety Commission, Smoke Alarms (Detectors) Can Save Your Life. Checked Nov 20, 2026.
- U.S. Consumer Product Safety Commission, Carbon Monoxide: The Invisible Killer. Checked Nov 20, 2026.
- U.S. Consumer Product Safety Commission, The Audibility of Smoke Alarms in Residential Homes (Sept 2005, revised Jan 2007). Checked Nov 20, 2026.
- National Fire Protection Association, news release on smoke alarms (Feb 25, 2019). Checked Nov 20, 2026.
- Kidde, Smoke Detector Maintenance. Checked Nov 20, 2026.
- Kidde, End of life warnings on a carbon monoxide alarm. Checked Nov 20, 2026.
- Texas Department of Insurance, State Fire Marshal's Office, Smoke Alarm Programs (updated May 4, 2026). Checked Nov 20, 2026.
I'll remind you when it's time.
Sign up, and I'll send you the job when your house needs it, with a short guide.
Reminders by text and email when your house needs them.
General information only, not a substitute for a licensed pro.
